|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: Disc Diameter Variation
At Inland Empire (Week 5) we experienced magazine jamming that was non-existent at San Diego (Week 2). We determined the main cause to be worn discs and burrs on discs. We also experienced much more aggressive defense at IE which disrupted the disc stack in our magazine and caused some jamming.
|
|
#2
|
||||
|
||||
|
Re: Disc Diameter Variation
Of course we are familiar with wear, rubber build-up, flatness, burrs, out-of-round, etc. These discs appeared to be genuinely larger in diameter.
|
|
#3
|
||||
|
||||
|
Re: Disc Diameter Variation
Sorry, I wish we had thought to measure the discs.
|
|
#4
|
|||
|
|||
|
Re: Disc Diameter Variation
At Inland Empire we experienced jamming that we did not at Long Beach, but it may have been due to an issue with our machine rather than the discs. I can't be certain.
|
|
#5
|
|||
|
|||
|
Re: Disc Diameter Variation
Actually we did had measured the discs but then one of us checked the manual and told us they changed the size of the discs so that they were larger.
We made our shooter adjustable for this difference because the discs we received from the KoP were of the small size and we needed to practice. All of those minor changes are always in the manual I suggest you to check it regularly in case they make a chenge. I know it's hard to read it all again but just check the important things such as sizes or the fouls. |
|
#6
|
|||||
|
|||||
|
Re: Disc Diameter Variation
Can you say where in the manual this is?
|
|
#7
|
||||
|
||||
|
Re: Disc Diameter Variation
He may be referring to Team Update 01-08, the very first one:
Quote:
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|