|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#31
|
||||
|
||||
|
Re: Problems with Vex Pro mecanum wheels
In logomotion, we also used machanuum wheels, and they strafed much better. An issue we are occuring is our gyro drifting this year too though.
|
|
#32
|
||||
|
||||
|
Re: Problems with Vex Pro mecanum wheels
Quote:
|
|
#33
|
||||
|
||||
|
Re: Problems with Vex Pro mecanum wheels
This is the first year ours was even close, and from what we could tell it made no difference whatsoever from a driver standpoint.
|
|
#34
|
||||
|
||||
|
Re: Problems with Vex Pro mecanum wheels
A drop of oil on each roller's axle can help a lot.
Also, during use the rollers can develop sharp edges on either side and sanding those down will keep the rollers from digging into the carpet when strafing. FYI: I speak from experience with AM mecs, not vexpro. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|