|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Anyone have Chiaphua Motor Specs?
I am quite interested to see the specs on the new motor this year, in particuliar what the output gear on the motor is.
We are thinking about finding some pre-made gears or the like that can work from the output shaft, or possibly getting a few made, but have no idea what sort of gear to use / cut. If anyone has this information, I thuink that other teams would also be curious to see how they could adapt it to whatever system they should want to use it for. |
|
#2
|
|||||
|
|||||
|
See the 'Big Black Motors' thread in Tech Help
Joe Johnson posted the basics in that thread. The output gear is non-standard, but Joe posted the description.
( http://www.chiefdelphi.com/forums/sh...&threadid=1457 ) Last edited by Brandon Martus : 08-01-2002 at 15:03. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Matching Drill and Chiaphua | sanddrag | Motors | 12 | 17-01-2003 11:23 |
| Coupling the Chiaphua & a variable Drill output | Jeff Sharpe | Motors | 9 | 13-01-2003 20:21 |
| Chiaphua Spec Sheet | Joe Johnson | Motors | 12 | 09-01-2003 16:01 |
| Chiaphua gears | R Bohannan | Technical Discussion | 10 | 01-10-2002 20:37 |
| Chiaphua gearing (Chippy and Bosch) | honky | Motors | 3 | 31-01-2002 10:28 |