Things you only do ONCE!

[2348humanplayer]

Originally Posted by Al Skierkiewicz

I was just thinking about this while writing in another thread. This may prove to be just a thread to make people chuckle but it also may serve to remind teams about safety and best practices. So here goes a start for the list...

1. Touch a soldering iron to see if it turned on.
2. Carry a battery with one hand, and dropping it. (on your foot or on the ground)
3. Put the red wire on the black battery terminal.
4. Wire the radio to a normal 12 volt output on the PD.
5. Use a crescent wrench as a hammer. (power on or off, you choose.)
6. Hold a robot part in your hand while drilling. ( a variety of errors jump to mind)
7. Put a practice battery on the robot. (actually happens more than you know)
8. Build to last year's dimensions because "they never change".
9. Use a dremmel tool to grind right next to your custom 3D printed part.
10. Mount your bumpers upside down. (except teams 11, 111, 1111)

This is funny, one of our students did number 6, but not for FRC, but for his senior project. Ended up getting a pretty good puncture wound, nothing life-threatening, but had his hand bandaged up for weeks.