Go to Post FIRST is the best thing I could have ever done. It shows me where I think my limits are, and it destroys them right in front of my eyes. My experiences with FIRST have defined who I am, and I am beyond blessed to have had them. - Audrey Chu [more]
Home
Go Back   Chief Delphi > Technical > Technical Discussion
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #18   Spotlight this post!  
Unread 09-05-2013, 15:40
George C's Avatar
George C George C is offline
Registered User
AKA: George Chisholm
FRC #1360 (Orbit Robotics)
Team Role: Mentor
 
Join Date: Jul 2011
Rookie Year: 2003
Location: Oakville, Ont, Canada
Posts: 147
George C is a splendid one to beholdGeorge C is a splendid one to beholdGeorge C is a splendid one to beholdGeorge C is a splendid one to beholdGeorge C is a splendid one to beholdGeorge C is a splendid one to beholdGeorge C is a splendid one to behold
Re: Highest traction wheels

We used 6" x 1.5" Colsons this year in a 6 wheel system with about 1/4" centre drop (which was too much). The drive team loves them. It's pretty difficult to tell if they're better with or without tread but after reading other threads on Colsons, we cut a diamond pattern tread in them using a dividing head on a horizontal mill. A thin slit saw set to cut about 0.100" deep slot on 15 degree intervals and about 15 degrees of parallel seemed about right. After 3 regionals and championships they show little wear. We did experience some lateral shifting of the wheel on the hubs we used but only on one or two of the outer wheels. Next year, we'll cut a coarse thread in the hub before pushing them in and maybe use a bit of PL Premium to help.
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 22:54.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi