Go to Post We are not the families of competiting robot teams, but we are a family of Gracious and Professionalism, because we know it better than anyone in the world. - wsansewjs [more]
Home
Go Back   Chief Delphi > FIRST > General Forum
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #25   Spotlight this post!  
Unread 30-05-2013, 14:12
DsRandhawa3244 DsRandhawa3244 is offline
Registered User
AKA: Dilpreet Randhawa
FRC #1259 (Paradigm Shift)
Team Role: Mechanical
 
Join Date: Mar 2011
Rookie Year: 2008
Location: Pewaukee WI
Posts: 9
DsRandhawa3244 is an unknown quantity at this point
Re: Video of Mecanum Drive Running Circles Around 6 Wheel Drives

(I'll post videos later, I'm not able to get to them now)

I was a driver for 1259 this year, and we used 4 wheel mecanum. Although I still feel we would have been a better robot with tank drive, we used the mecanum as well as we could. In Wisconsin I was able to outmaneuver some of the opposing alliances (with tank drive) with a combination of strafing and spinning to get to the pyramid so we could start our 3 level climb.

Would I have been able to do that with tank? Probably...chances are with tank we wouldn't get into situations where we had to really try hard to outmaneuver other robots. But the mecanum allowed us to move in dimensions that tank robots couldn't, and in the small, cramped side lanes on either side of the field near the pyramids, I think that additional degree of freedom helped a little bit.

A quick aside--this has befuddled our programmers for some time now. Our robot strafes almost perfectly on smooth floors, like tile, or the traditional wooden gym floors. Yet, on the field at both Wisconsin and Duluth, strafing was slow, and required a lot of manual adjustment on my end to do well. Trying to strafe with just one joystick meant turning while moving in one direction. It was our first year doing mecanum, so if anyone's able to point us in the right direction, that'd be swell. We thought it was the individual spindles on the wheels slipping, but I've seen other robots use 6" mecanum wheels from andymark no problem.
Reply With Quote
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 22:28.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi