|
|
|
 The key is to get the WHOLE TEAM to understand that you are designing and building a robot, which is a complete system - not just a collection of mechanical assemblies stuck together. - SteveGarward [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools |
Rating: 
|
Display Modes |
|
#16
20-06-2013, 15:38
|
||||
|
||||
|
Re: CNC Tooling
We got a box of roughly 100 1/8" bits for our 4' by 4' cnc router to cut sheet aluminum. Our sponsor gave us the box several years ago, and we've only broken a few and we've cut a TON of sheet metal. The bits are similar to 3317A21 from mcmaster, but they are a little different, and the writing on the box is in Chinese. The trick is to get the feed rate correct, and have an air line always pointing at the bit.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode