|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
Re: Banebots Wheels
We used mostly blue to manipulate the game pieces.
We started using three inch wheels for our shooter and the orange ones tore up quickly so we switched to blue. This significantly reduced wear but we were still replacing them every 6 matches. After watching several other teams we switched to four inch orange wheels and were able to substantially reduce compression and were still shooting harder than our previous setup with significant reduction in wear. Obviously the increase in wheel speed was a huge factor. |
|
#2
|
|||
|
|||
|
Re: Banebots Wheels
We originally used a blue Banebots wheel for the shooter and wore it out almost immediately. Switched to a harder blue rubber wheel from McMaster which lasted for the season, but did wear on each shot and by IRI, needed to be replaced. Switched to blue urethane from McMaster, and haven't had a problem since. Grips much better.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|