Encoder problems - Chief Delphi

Once you go hex you'll never go back. - sdcantrell56 [more]

		Chief Delphi > Technical > Programming > NI LabVIEW
Encoder problems

Thread Tools

Rate Thread

Display Modes

#30

25-08-2013, 12:49

Ether

systems engineer (retired)

no team

Join Date: Nov 2009

Rookie Year: 1969

Location: US

Posts: 8,083

Re: Encoder problems

Quote:

Originally Posted by Peleg2230

Should I replace back the encoder to the E4P that probably will work around those speeds?

The E4P should work, if you physically connect only one channel and set it up as a counter. For a 360 CPR E4P, I recommend you try changing the blue "5" to "126" for high speeds (like 6000 RPM) to reduce the noise.

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 01:40.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.