Battery Leads and Resistance

And like Woodie told us in his talk, all the bad stuff we anguished over will be replaced by the memories of the achievements and good time we had this year. - Wayne C. [more]

		Chief Delphi > Technical > Electrical
Battery Leads and Resistance

Thread Tools

Rate Thread

Display Modes

#12

09-09-2013, 14:39

Joe Ross

Registered User

FRC #0330 (Beachbots)

Team Role: Engineer

Join Date: Jun 2001

Rookie Year: 1997

Location: Los Angeles, CA

Posts: 8,569

Re: Battery Leads and Resistance

Quote:

Originally Posted by Andy A.

Also, the Anderson connectors are well made but sometimes the contacts get a little charred or the crimp comes loose. Take a look at the contacts and give the wires a wiggle to verify they are clean and tight.

Here's what might happen if the Anderson connector is not fully engaged: http://www.chiefdelphi.com/forums/sh...threadid=18079 (Further explanation: http://www.chiefdelphi.com/forums/sh...0&postcount=20)

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 20:35.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.