Quote:
Originally Posted by MrBasse
What's non-standard about the 2.25" buttons badge-a-minit produces compared to other 2.25" buttons? We have used components from several different suppliers in our machine without issue.
To the OP, you will get tons of opinions about this topic. Everyone has their favorite. This is the same issue you'll run into if you ask what company makes the best car. If I were you, I would see if I could track down someone close t you that has one and see if they would let you take it for a test drive.
We like our badge a minit machine, it works well. We have a bad button every now and then, but I'm sure other brands do as well. Plus their prices on parts are decent and their shipping is usually free and is very quick. |
The blanks from badge-a-minit don't fit in other 2.25 button makers. That's why I called them non standard.
At least try to make sure other teams are aware of you. Don't be obnoxious, but don't be a wall flower either. - Joe Johnson [more] 
22-09-2013, 23:13
Threaded Mode