|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: Soldering Survey
Done.
|
|
#2
|
||||
|
||||
|
Re: Soldering Survey
Done,
One question you forgot to ask, "How big is your magnifying glass" ![]() |
|
#3
|
|||||
|
|||||
|
Re: Soldering Survey
Quote:
Oh, and I filled out the survey too! |
|
#4
|
|||
|
|||
|
Re: Soldering Survey
Done.
What are you attempting to determine from this survey? |
|
#5
|
||||
|
||||
|
Re: Soldering Survey
Done
|
|
#6
|
|||
|
|||
|
Re: Soldering Survey
It may have been best if your survey had included a question that asked if the participant is a student, an adult mentor, an adult mentor who works in electronics (PCB) manufacturing. Otherwise, you will get highly divergent responses that may be difficult to explain. What is easy for me now would not have been easy for me 40 years ago.
If you really do have someone who can assemble boards in a day, get in touch with me. |
|
#7
|
||||
|
||||
|
Re: Soldering Survey
Completed:
I built my own assembly pick and place systems complete with video targeting for component placement. The axis are linear stages from Intelligent Actuator. I used vacuum placement. I have 'reflow' ovens made from toaster ovens I retrofitted with digital temperature controls. I used to wash my boards down in an old dishwasher (and no I did not drain the waste into the sewer or septic). I had an ultrasonic golf club cleaner somewhere that was handy for some projects as well It's only crazy if it doesn't work. ![]() I have 2 LPKF Protomat 92S with the surface mount paste systems to make PCB as well. Not to mention the electroplating systems and liquid etching systems (ferric chloride and sodium persulfate). I try to keep the really nasty chemicals to a minimum. Last edited by techhelpbb : 03-10-2013 at 16:20. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|