[HELP] cRIO not imaging as it should be

[BBray_T1296]

Originally Posted by domingocool

How do you go about pinging the cRIO with CMD?

Pinging an IP (or website)

from the desktop with all windows minimized and an Ethernet link directly from your computer to the cRIO (powered on)
-hold /windows key (meta)/ and while holding, press /r/
-type "cmd" (no quotes)
-press /enter/
-type "ping" then /spacebar/ then "your cRIO's IP" (you said before: 10.46.45.5)
-press /enter/

It should look something like picture 1 ("google.com" will be "10.46.45.5"). Of course, the ping values may be different, but that is not what you are pinging to test, you just want any reply at all. If it looks like picture 2, I would try pinging "10.46.45.1" If that fails, you may have a problem. If it works and you DO get a reply, however, there may be hope yet...

Anyways, If it is bricked, NI probably has some sort of warranty on that...