Quote:
Originally Posted by JCharlton
In the past we've used DSub connectors, but they required good soldering skills and weren't very forgiving.
|
One option is to use D-subs that work with ribbon cable such as the example below. I have always used a vise to gently "crimp" connectors such as these for the prototypes I have worked on.
www.digikey.com/product-detail/en/1658612-3/AFR15B-ND/825359
If I recall correctly, many of the cRio interfaces will work with connectors that also take the same type of ribbon cable.
We are here to support each other. - Mike Martus [more] 
17-10-2013, 13:31
Threaded Mode