Team 610's 2013 Robot CAD Models Available

Originally Posted by jman4747

So I was wondering what the shifting equipment is used for as I can't seem to find what the 48t PTO gear drives. Please excuse me if this question is silly but I can't seem to figure it out.

They originally ha a 30 pt. climbing mechanism they never ran at competition.

[jamierose]

Originally Posted by Andrew Lawrence

They originally ha a 30 pt. climbing mechanism they never ran at competition.

This is right.

We never used it because we weren't able to get it to work. We considered making one between our first two regionals, but we then realized that if we couldn't make a 30-point climber during the 6 and a bit weeks of build season, there's no way we'd be able to make one in a few weeks between regionals. We decided to make an intake for a 5-disc autonomous mode instead. It didn't work too well, but it was still a pretty cool project.

[brennonbrimhall]

Thanks for sharing this with the commuinty! Taz was a great robot, and I it was great working with you guys at Rah Cha Cha!