Could anyone 3D print something for us?

[Andrew Schreiber]

Originally Posted by Andrew Lawrence

Schreiber are you ever not working late at night?

Also, would y'all mind if pictures of the final sprockets are posted here online? I'd love to see them.

Andrew, I never sleep.

As requested: http://imgur.com/L84SrqD

I had a little warping, I just ran a second batch and I'll see if that happened again. If so I'll be tweaking the settings in the printer (likely running the bed 10C hotter) to fix it on the next couple.




ksafin - I do suggest that you still order the proper parts and only use these for prototyping. Depending on your use there is a very real chance of failing these parts and I'd feel terrible if you lost a match because this part failed.

[ksafin]

Originally Posted by Andrew Schreiber

Andrew, I never sleep.

As requested: http://imgur.com/L84SrqD

I had a little warping, I just ran a second batch and I'll see if that happened again. If so I'll be tweaking the settings in the printer (likely running the bed 10C hotter) to fix it on the next couple.




ksafin - I do suggest that you still order the proper parts and only use these for prototyping. Depending on your use there is a very real chance of failing these parts and I'd feel terrible if you lost a match because this part failed.

Andrew,

These look more than decent enough to use until the sprockets come.

Like I said, we ordered 16 from Tetrix and just need something in the meantime since our competition date is approaching and don't know what we can scrap up by then.

Thanks again for your help, we really appreciate it.

[Andrew Schreiber]

Originally Posted by ksafin

Andrew,

These look more than decent enough to use until the sprockets come.

Like I said, we ordered 16 from Tetrix and just need something in the meantime since our competition date is approaching and don't know what we can scrap up by then.

Thanks again for your help, we really appreciate it.

Cool, 6 done so far. PM an address to mail them to and I'll try to drop 'em in the mail on Monday.