Moving Locations

[colin340]

take a nice sheet of 3/4" plywood, buy some saw horses brackets and a few 2x4 was then add a handle full of 2"drywall screws!!! = best table ever and HUGE !!!

Justin and I made one it was great

[mrmummert]

Hello...

Our team moved every year until 2009. We didn't compete that year, but
during that summer we moved into a old Gym the school system no longer
used. We've been there ever since. From the picture you can see work tables
we made ourselves. there are 3 of these. The students and one of the mentors in the picture are at plastic folding tables we use for the computers and meetings. We have about 12 of those. We needed storage cabinet space and after being in the gym a year the high school remodeled a couple of rooms and were getting rid of some cabinets. They needed repairs and we got them and repaired them ourselves and have been using them since. The chairs and stools we have are stuff that was in storage.

When we moved, we basically moved our tools, power tools, old robots, carpet, and a old work bench we have used since our second year. We used the computers at the high school while we were there, but when we moved we got some of our own that were used from a local college near here. Since the gym was never built or intended for robotics we had the school system add some new wiring to accommodate our needs. We have to share the gym with the Wrestling team for a couple months (we use one side and they use the other and if we need the other side for practice we work around their schedule) but the rest of the time we have it to ourselves.

We didn't do so good in 2010 the first year we were there, but we've been in the finals every year since and were one of the winners at VCU this year.

[TOPHER097]

My best tip is to bring EVERYTHING from your old field, even if it is a piece of scrap metal; you never know what you will need. From what I hear, you should have time before the season to get Autodesk loaded to some computers and get some tables/chairs. I wouldn't be bummed out because of the few things that you are going to loss, because they are retrievable, work hard on getting everything straight before the build season. Good luck!

[alex.lew]

We moved to a new build site on the school campus over the summer. Sketch a rough layout, prioritize things like electrical outlets for any tools, minimizing safety hazards, maintaining clear organization, etc. Having plenty of room to easily move the robot anywhere around the buildspace is extremely helpful.
Use this opportunity to go through your entire inventory and scrap whatever isn't necessary. You also have the opportunity to categorize items by group as specifically as you want for maximum clarity.

[Seth Mallory]

In our old shop al the partions had walls made from whiteboard. You could write on any wall when you wanted to show a student some point. The students also used it all the time. I miss those walls.