|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#17
|
||||
|
||||
|
Re: pic: FRC Control System in a box
Our current plan is to wire up a quick disconnect terminal to the pneumatic break out and mount thru the wall of the box with the control system in it similar to how we have the encoder's wired. We then will make an identical connector in the pneumatic box but wired to the solenoids instead of the breakout.
We will then make a wire connecting the terminal on each box and another one from the pneumatic box to a panel of switches that will be 3d printed |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|