Servos, cameras, and inverting limit switches

[Mark McLeod]

44001 isn't an error, it's just an informational message.
It's telling you the other devices that it is able to connect to.

10.xx.yy.5 should be your Driver Station PC's Ethernet adapter.
10.xx.yy.9 should be your Driver Station PC's wireless adapter.

These can be set automatically when the Driver station is started.

1. Go to the Setup tab
2. Click on "Choose NIC..."
3. See if both the wireless and wired networks are NOT set to manual.

Get the Ethernet connection working again, before working on the wireless connection.

Your wireless connection problem can be due to several things, in addition to an incorrect IP address/netmask.

• If you haven't used wireless since your last competition, then the robot bridge probably still still has the playing field security set. There is a Bridge Configuration Tool we use to setup the robot bridge properly for home use.
• Check to see if your PC can see the robot network on the Windows wireless connection list. You may have to manually connect to it if you haven't chosen to Connect automatically.