|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
|
||||
|
||||
|
Re: [FTC]: Servo specifications?
Quote:
1) Take a simple postal scale and measure the force it takes to lift the scoop at some reasonable distance from the pivot point. 2) Multiply that force by the distance from the pivot to get torque. Use a consistent system of units. 3) Compare that required torque to the torque rating of the servo. You might find this document helpful: http://stanford.edu/~sebell/firstphysics.html Last edited by Ether : 14-11-2013 at 16:57. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|