Servos, cameras, and inverting limit switches

[Mark McLeod]

To see the devices connected to your laptop, open a Windows command window (go to Start and type "cmd" into the search at the bottom) and type:

arp -av

The wireless AP will show up connected to your PC's wireless adaptor.


Wireless settings should be:

• Enable Wireless = checked
• Wireless network name = 4692 (but can be anything)
• Security Mode = none
• Wi-Fi Protected Setup Enabled = NOT checked
• Wireless MAC Cloning = NOT checked

Network settings should be:

• LAN Connection Type = Static IP
• IPv4 Address = 10.46.92.1
• Subnet Mask = 255.0.0.0