Suitable alternatives?

[joelg236]

I've been asked to order these parts, which are out of stock at the moment:

Vex Pro
Flanged Bearing - 1/2" Hex ID x 1.125" OD
http://www.vexrobotics.com/vexpro/sh.../bearings.html

West Coast Products
Colson Hub: 1.5” Wide Wheel Live Hub
http://wcproducts.net/wcp-00053/

Andy Mark
Timing Belt, Gates HTD, 15mm wide, 160T, 800-5M-15 (am-2266)
http://www.andymark.com/product-p/am-2266.htm

I've found this so far:

Flanged Bearing - 1/2" Hex ID x 1.125" OD
http://www.andymark.com/product-p/am-0279.htm

Colson Hub: 1.5” Wide Wheel Live Hub
http://www.robotmarketplace.com/prod...WCP-00053.html

And nothing so far for belts (we have a KoP set - is this the same thing?)


Sorry if these are easy questions, not my realm of expertise

[R.C.]

The WCP hubs are coming back into stock in 2-3 weeks. Some updates and such to them (they'll be a tad better than before).

-RC

[Gregor]

The hex VEXPro bearings should be back in stock soon.

http://www.chiefdelphi.com/forums/sh...ex#post1302638

[Qbot2640]

Originally Posted by joelg236

I've been asked to order these parts, which are out of stock at the moment:

Andy Mark
Timing Belt, Gates HTD, 15mm wide, 160T, 800-5M-15 (am-2266)
http://www.andymark.com/product-p/am-2266.htm

Belt - Part number A 6R25M160150 from SDP/SI
https://sdp-si.com/eStore/Catalog#

[joelg236]

Originally Posted by Qbot2640

Belt - Part number A 6R25M160150 from SDP/SI
https://sdp-si.com/eStore/Catalog#

Is this identical to the one I listed?

[joelg236]

Originally Posted by R.C.

The WCP hubs are coming back into stock in 2-3 weeks. Some updates and such to them (they'll be a tad better than before).

-RC

I don't have 2-3 weeks to wait unfortunately. Is the alternative I listed the same in every way?

[R.C.]

Originally Posted by joelg236

I don't have 2-3 weeks to wait unfortunately. Is the alternative I listed the same in every way?

Shoot an email to Sales, we'll most likely have some older stuff still available. Length will probably be the only thing different.

Thanks,

-RC

[aryker]

Originally Posted by joelg236

Is this identical to the one I listed?

It looks that way, yes. Same pitch length, belt width, number of teeth.