Go to Post Starting projects is fun, easy, and exposes you to new things, but finishing them shows true character. - Greg McKaskle [more]
Home
Go Back   Chief Delphi > Technical > Electrical
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Closed Thread
Thread Tools Rating: Thread Rating: 2 votes, 5.00 average. Display Modes
  #1   Spotlight this post!  
Unread 11-12-2013, 00:06
feverittm's Avatar
feverittm feverittm is offline
Registered User
FRC #0997 (Spartans)
Team Role: Mentor
 
Join Date: Apr 2010
Rookie Year: 2010
Location: Corvallis, OR
Posts: 124
feverittm will become famous soon enoughfeverittm will become famous soon enough
Gluing PWM connectors into Motor Controllers

I was talking to another one of our mentors the other day and he told me something interesting.

I have always (past 4 years of FIRST electrical) that it is a good idea to put a drop of hot melt glue on your PWM connections on the motor controllers to keep them from falling out. This is especially true for older Victor style controllers whose connections can become loose.

However, he told me that 'gluing' the PWM connectors is illegal as it counts as 'modifying' the controller.

Does anyone know for sure? I wanted to make sure before we decided to follow this strategy and maybe make a mistake.

Thanks
__________________
Floyd Moore
Mentor Electrical and Pneumatics
Team 997 - Spartan Robotics
Corvallis High School, Corvallis Oregon
  #2   Spotlight this post!  
Unread 11-12-2013, 00:09
joelg236 joelg236 is offline
4334 Retired Mentor & Alumni
AKA: Joel Gallant
no team
Team Role: Mentor
 
Join Date: Dec 2011
Rookie Year: 2012
Location: Calgary
Posts: 733
joelg236 has a reputation beyond reputejoelg236 has a reputation beyond reputejoelg236 has a reputation beyond reputejoelg236 has a reputation beyond reputejoelg236 has a reputation beyond reputejoelg236 has a reputation beyond reputejoelg236 has a reputation beyond reputejoelg236 has a reputation beyond reputejoelg236 has a reputation beyond reputejoelg236 has a reputation beyond reputejoelg236 has a reputation beyond repute
Re: Gluing PWM connectors into Motor Controllers

I've seen discussion of this before. Most people agree that it is technically illegal, but depending on the inspector may or may not get looked at.

We did it last year at 3 competitions, never had an issue.
__________________
All opinions are my own.
  #3   Spotlight this post!  
Unread 11-12-2013, 00:31
Nirvash's Avatar
Nirvash Nirvash is offline
Registered User
AKA: Bryan
FRC #4676
Team Role: Programmer
 
Join Date: Feb 2011
Rookie Year: 2011
Location: Orland Park, IL
Posts: 221
Nirvash has a spectacular aura aboutNirvash has a spectacular aura about
Re: Gluing PWM connectors into Motor Controllers

I would agree that it is technically illegal. However if one follows that rule that strictly, it would probably also disallow labels, Velcro and anything else that uses adhesive to bond to the motor controller.
In my opinion, it is an example of taking a rule too literally.
__________________
Team 3488 - Electrical Lead/Programming Lead 2011-2013
Team 4676 - Electrical/Programming Mentor 2013-Present
  #4   Spotlight this post!  
Unread 11-12-2013, 00:32
billbo911's Avatar
billbo911 billbo911 is offline
I prefer you give a perfect effort.
AKA: That's "Mr. Bill"
FRC #2073 (EagleForce)
Team Role: Mentor
 
Join Date: Mar 2005
Rookie Year: 2005
Location: Elk Grove, Ca.
Posts: 2,384
billbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond repute
Re: Gluing PWM connectors into Motor Controllers

We do this on a regular basis with both 884 Victors and Spike relays. Not once has an inspector had an issue with it.

Honestly, I can't even imagine why it would be an issue or even be considered modifying a speed controller any more than using thread locking compound on a motor mounting screw is modifying the motor.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
  #5   Spotlight this post!  
Unread 11-12-2013, 02:14
jspatz1's Avatar
jspatz1 jspatz1 is offline
Registered User
AKA: Jeff
FRC #1986 (Team Titanium)
Team Role: Mentor
 
Join Date: Jan 2008
Rookie Year: 2007
Location: Lee's Summit, MO
Posts: 836
jspatz1 has a reputation beyond reputejspatz1 has a reputation beyond reputejspatz1 has a reputation beyond reputejspatz1 has a reputation beyond reputejspatz1 has a reputation beyond reputejspatz1 has a reputation beyond reputejspatz1 has a reputation beyond reputejspatz1 has a reputation beyond reputejspatz1 has a reputation beyond reputejspatz1 has a reputation beyond reputejspatz1 has a reputation beyond repute
Send a message via AIM to jspatz1
Re: Gluing PWM connectors into Motor Controllers

Ah, the semi-annual PWM-gluing thread.

Its not really an uncertain matter of opinion whether or not gluing is considered tampering with a motor controller. R65 specifically states that gluing is prohibited on a motor controller. Its a dumb rule, but its a clearly stated dumb rule.
__________________
  #6   Spotlight this post!  
Unread 11-12-2013, 02:21
cbale2000's Avatar
cbale2000 cbale2000 is offline
Registered User
AKA: Chris Bale
FRC #5712 (Gray Matter)
Team Role: Mentor
 
Join Date: Apr 2006
Rookie Year: 2004
Location: Saginaw, MI
Posts: 970
cbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond repute
Re: Gluing PWM connectors into Motor Controllers

The nice thing about using hot glue, whether you believe its legal or not, is that it can be easily removed if an inspector has a problem with it.
  #7   Spotlight this post!  
Unread 11-12-2013, 09:01
billbo911's Avatar
billbo911 billbo911 is offline
I prefer you give a perfect effort.
AKA: That's "Mr. Bill"
FRC #2073 (EagleForce)
Team Role: Mentor
 
Join Date: Mar 2005
Rookie Year: 2005
Location: Elk Grove, Ca.
Posts: 2,384
billbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond repute
Re: Gluing PWM connectors into Motor Controllers

Quote:
Originally Posted by jspatz1 View Post
Ah, the semi-annual PWM-gluing thread.

Its not really an uncertain matter of opinion whether or not gluing is considered tampering with a motor controller. R65 specifically states that gluing is prohibited on a motor controller. Its a dumb rule, but its a clearly stated dumb rule.
Jeff,
Thank you! Whether I agree with the rule or not, it is a rule, and I was unaware of it. There is no one to blame for that but me. Time to change our practices.

Quote:
Originally Posted by cbale2000 View Post
The nice thing about using hot glue, whether you believe its legal or not, is that it can be easily removed if an inspector has a problem with it.
Agreed!
That said, it is a hard and fast rule. So, if it is still in place this coming season, we WILL follow it.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
  #8   Spotlight this post!  
Unread 11-12-2013, 13:12
Pault's Avatar
Pault Pault is offline
Registered User
FRC #0246 (Overclocked)
Team Role: College Student
 
Join Date: Jan 2013
Rookie Year: 2012
Location: Boston
Posts: 618
Pault has a reputation beyond reputePault has a reputation beyond reputePault has a reputation beyond reputePault has a reputation beyond reputePault has a reputation beyond reputePault has a reputation beyond reputePault has a reputation beyond reputePault has a reputation beyond reputePault has a reputation beyond reputePault has a reputation beyond reputePault has a reputation beyond repute
Re: Gluing PWM connectors into Motor Controllers

Remember the standard disclaimer that the rule could possibly change next year. And this is one case where that really should happen (at least put in a blue box beneath the rule creating an exception for this).
  #9   Spotlight this post!  
Unread 11-12-2013, 13:30
thefro526's Avatar
thefro526 thefro526 is offline
Mentor for Hire.
AKA: Dustin Benedict
no team (EWCP, MAR, FRC 708)
Team Role: Mentor
 
Join Date: Aug 2006
Rookie Year: 2005
Location: New Jersey
Posts: 2,599
thefro526 has a reputation beyond reputethefro526 has a reputation beyond reputethefro526 has a reputation beyond reputethefro526 has a reputation beyond reputethefro526 has a reputation beyond reputethefro526 has a reputation beyond reputethefro526 has a reputation beyond reputethefro526 has a reputation beyond reputethefro526 has a reputation beyond reputethefro526 has a reputation beyond reputethefro526 has a reputation beyond repute
Send a message via AIM to thefro526 Send a message via MSN to thefro526
Re: Gluing PWM connectors into Motor Controllers

For what it's worth, here's the rule (2013 Manual) that's being cited as preventing hot glue from being used to secure PWM connectors to speed controllers.

Quote:
Originally Posted by 2013 Game Manual
4.1.9.11 R65
The Driver Station software, cRIO, motor controllers, relay modules, wireless bridge, and batteries shall not be
tampered with, modified, or adjusted in any way (tampering includes drilling, cutting, machining, gluing, rewiring,
disassembling, etc.), with the following exceptions:

A. User programmable code in the cRIO may be customized.
B. Dip switches on the cRIO may be set (applies to cRIO-FRC only).
C. Motor controllers may be calibrated as described in owner's manuals.
D. Fans may be attached to motor controllers and may be powered from the power input terminals.
E. If powering the compressor, the fuse on a Spike H-Bridge Relay may be replaced with a 20A Snap-Action
circuit breaker.
F. Wires, cables, and signal lines may be connected via the standard connection points provided on the devices.
G. Fasteners may be used to attach the device to the OPERATOR CONSOLE or ROBOT.
H. Labeling may be applied to indicate device purpose, connectivity, functional performance, etc.
I. Brake/Coast jumpers on motor controllers may be changed from their default location.
J. Limit switch jumpers may be removed from a Jaguar motor controller and a custom limit switch circuit may be
substituted.
K. If CAN-bus functionality is used, the Jaguar firmware must be updated as required by FIRST (see Rule R68-D).
L. The First Touch I/O module’s firmware may be modified.
M. Devices may be repaired, provided the performance and specifications of the component after the repair are
identical to those before the repair.
If you read the rule in it's black and white context, speed controllers are not allowed to be modified other than the above exceptions. (Fans, Connect Wires to/from, Labeling, etc.)

Depending on how you interpret the rule, arguments can be made on both sides for why hot-gluing the PWM cable is legal or not legal.

On one hand, you can argue that the speed controller is not being modified, as it still performs and functions the same as a commercial off the shelf unit, with the only real change being that the PWM cable will not come unplugged at random. (And you are allowed to connect PWM cables to the controller per R56.F)

On the other hand, it could be argued that if the hot glue were to remain on the speed controller after the PWM cable is removed (it happens) then the speed controller has now been modified. The hot glue could also be interpreted as making the 'standard connection' a 'non-standard connection', depending on the inspector.

I guess if someone really wanted to stretch things a bit, one could argue that if the PWM cable comes unplugged during operation, then the speed controller is not functioning as intended, and is therefore in need of repair. Since the speed controller is designed to retain a PWM cable under normal operating conditions, a dab of hot glue on the connector would allow the speed controller to be restored to it's intended function. (Although, it could be argued as being different in function than a COTS unit, depends on the inspector.)

In any case, in my 8-ish seasons of doing FRC, I can't remember a single instance of an inspector giving us a hard time about hot gluing the PWM's into the speed controllers - heck, some have even suggested it. If you decide to go through and apply hot glue to the connections in the coming season, make sure that you re-read the rules, and see if they've changed at all. If they don't, be aware that you may have to remove the hot glue down the road, and if you're told to do so, to just go with it.
__________________
-Dustin Benedict
2005-2012 - Student & Mentor FRC 816
2012-2014 - Technical Mentor, 2014 Drive Coach FRC 341
Current - Mentor FRC 2729, FRC 708
  #10   Spotlight this post!  
Unread 11-12-2013, 13:42
Alan Anderson's Avatar
Alan Anderson Alan Anderson is offline
Software Architect
FRC #0045 (TechnoKats)
Team Role: Mentor
 
Join Date: Feb 2004
Rookie Year: 2004
Location: Kokomo, Indiana
Posts: 9,113
Alan Anderson has a reputation beyond reputeAlan Anderson has a reputation beyond reputeAlan Anderson has a reputation beyond reputeAlan Anderson has a reputation beyond reputeAlan Anderson has a reputation beyond reputeAlan Anderson has a reputation beyond reputeAlan Anderson has a reputation beyond reputeAlan Anderson has a reputation beyond reputeAlan Anderson has a reputation beyond reputeAlan Anderson has a reputation beyond reputeAlan Anderson has a reputation beyond repute
Re: Gluing PWM connectors into Motor Controllers

Quote:
Originally Posted by thefro526 View Post
On one hand, you can argue that the speed controller is not being modified,...
Unfortunately, the "gluing" restriction falls under the category of tampering, so any argument about modifications is not relevant.
  #11   Spotlight this post!  
Unread 11-12-2013, 14:20
DonRotolo's Avatar
DonRotolo DonRotolo is offline
Back to humble
FRC #0832
Team Role: Mentor
 
Join Date: Jan 2005
Rookie Year: 2005
Location: Atlanta GA
Posts: 7,019
DonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond repute
Re: Gluing PWM connectors into Motor Controllers

We have used a substance a lot like modeling clay* to hold the PWM cables on a Victor in place (back when we used Victors). We never had a problem with inspections, and it isn't gluing, nor is it permanent, so it does not appear to be tampering (no more than using a label to mark the Victor, for example).


*I think it is the stuff used to hold fine china and vases down to a shelf so it doesn't fall over. Museum putty?
__________________

I am N2IRZ - What's your callsign?
  #12   Spotlight this post!  
Unread 11-12-2013, 15:45
AlexH AlexH is offline
Registered User
no team
Team Role: College Student
 
Join Date: Sep 2010
Rookie Year: 2010
Location: PA
Posts: 215
AlexH is a name known to allAlexH is a name known to allAlexH is a name known to allAlexH is a name known to allAlexH is a name known to allAlexH is a name known to all
Re: Gluing PWM connectors into Motor Controllers

http://www.loctiteproducts.com/p/cnt...ting-Putty.htm

this stuff?
__________________
My Instructables
  #13   Spotlight this post!  
Unread 11-12-2013, 17:49
DonRotolo's Avatar
DonRotolo DonRotolo is offline
Back to humble
FRC #0832
Team Role: Mentor
 
Join Date: Jan 2005
Rookie Year: 2005
Location: Atlanta GA
Posts: 7,019
DonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond repute
Re: Gluing PWM connectors into Motor Controllers

Yes. I remember it was blue, didn't leave any residue, and wasn't Silly Putty.
__________________

I am N2IRZ - What's your callsign?
  #14   Spotlight this post!  
Unread 11-12-2013, 19:21
Michael Hill's Avatar
Michael Hill Michael Hill is offline
Registered User
FRC #3138 (Innovators Robotics)
Team Role: Mentor
 
Join Date: Jul 2004
Rookie Year: 2003
Location: Dayton, OH
Posts: 1,580
Michael Hill has a reputation beyond reputeMichael Hill has a reputation beyond reputeMichael Hill has a reputation beyond reputeMichael Hill has a reputation beyond reputeMichael Hill has a reputation beyond reputeMichael Hill has a reputation beyond reputeMichael Hill has a reputation beyond reputeMichael Hill has a reputation beyond reputeMichael Hill has a reputation beyond reputeMichael Hill has a reputation beyond reputeMichael Hill has a reputation beyond repute
Re: Gluing PWM connectors into Motor Controllers

I'd disagree that this is in any way tampering with motor controllers. You haven't changed the motor controller one bit with hot glue. If you, say, cut the plastic casing to make them more accessible, then you've tampered with it, but doing anything additive isn't changing it, especially since you can take the hot snot off and the motor controller is identical. It's the same as taping. As an inspector at QCR and CMP, I never told anyone to remove it. It's common sense and good practice IMO, and until Al or the Lead Inspector at competitions says it's wrong, I don't think any inspector should DQ for it.
  #15   Spotlight this post!  
Unread 11-12-2013, 21:35
DonRotolo's Avatar
DonRotolo DonRotolo is offline
Back to humble
FRC #0832
Team Role: Mentor
 
Join Date: Jan 2005
Rookie Year: 2005
Location: Atlanta GA
Posts: 7,019
DonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond repute
Re: Gluing PWM connectors into Motor Controllers

Quote:
Originally Posted by Michael Hill View Post
I'd disagree that this is in any way tampering with motor controllers. You haven't changed the motor controller one bit with hot glue. If you, say, cut the plastic casing to make them more accessible, then you've tampered with it, but doing anything additive isn't changing it, especially since you can take the hot snot off and the motor controller is identical. It's the same as taping. As an inspector at QCR and CMP, I never told anyone to remove it. It's common sense and good practice IMO, and until Al or the Lead Inspector at competitions says it's wrong, I don't think any inspector should DQ for it.
I agree, but the rule specifically says Gluing.
__________________

I am N2IRZ - What's your callsign?
Closed Thread


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 19:29.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi