|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools |
Rating:
|
Display Modes |
|
#13
|
|||||
|
|||||
|
Re: Back for more..VEXpro 2014 Product Unveiling
Versaframe is using #8 hardware and 5/32 rivets. Might be time for us to consider stepping down from #10 & 3/16" rivets.
We used a similar system in 2012 but drilled each hole by hand on our drill press and cut every gusset on a bandsaw. This seems like a much easier option. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|