|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#4
|
|||
|
|||
|
Re: [FTC]: HiTechnic Motor Controllers - Motor and Power wires fall out???
The tetrix motor controller terminals are awful.
A very poor design. We've attempted to mitigate this by attaching anderson powerpole pigtails to the terminal and then using ziptied strain relief to an acrylic board that all controllers are mounted on. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|