|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#16
|
||||
|
||||
|
Re: 3V3 digital signal to the cRIO
A couple of other possibilities:
-- Use an analog input, instead of a digital one (via the analog breakout board, I mention this mainly in case someone comes along, reads this, and wants something easy and quick) -- Use an opto-isolator (this not only level shifts, but avoids potential problems with ground loops -- you probably don't need to worry about this, but it is very good to be aware of and on the lookout for this type of problem) |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|