|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
|
||||
|
||||
|
Re: EV3 Programming
Depends on if you're using it for competition or not.
For FLL, you can really only use the EV3 software. For non-FLL purposes, ROBOTC is coming out (or has come out) with an update, I believe that the people behind Brixcc are working on an update as well. Of course, interfacing with the Linux environment directly through C or similar is always an option. ![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|