|
|
|
 The only thing I am learning from this thread is the difference between who is arrogant enough to objectify their own interpretations and who is wise enough to question their own interpretations. - Michael Corsetto [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
pic: Cascade Elevator
The cable rigging is a bit interesting, described further by Jared341 in this post: http://www.chiefdelphi.com/forums/sh...7&postcount=18. The drum was not designed, but with this setup, you don't need a 2-stage drum. Cable is Dyneema, as 254 has used in the past. Bearings are R3 bearings, as used by 973 and show in the RAMP videos. Last edited by Knufire : 03-01-2014 at 01:03. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode