|
|
|
 At the end of the day, and this is where many may disagree, it's about what is learnt and not about who wins. - popnbrown [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| At the end of the day, and this is where many may disagree, it's about what is learnt and not about who wins. - popnbrown [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
The SMC gasket with the small protruberences fits nicely in the holes in the manifold and/or the valve body, so they don't slide off onto the floor.
The Festo valve should work if you've wired just the "plug" part correctly. Connect the wired plug to the valve, and check with an ohmeter for continuity from the wires through the coil. There are only three connections available, and one the non parallel blade, is a "ground". If you don't like the little pilot lights, don't use 'em: the valve operates the same, either way. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| multiple cyclinders from one double solenoid | Ed Crammond | Pneumatics | 1 | 07-02-2003 18:49 |
| double solenoid | gail | OCCRA | 0 | 11-10-2002 19:42 |
| Will trade for double solenoid valve | archiver | 2001 | 2 | 24-06-2002 00:33 |
| Does anyone have extra solenoid valves????? | Elgin Clock | Pneumatics | 5 | 18-02-2002 12:43 |
| Single Solenoid Valve SMC | Chubtoad | Technical Discussion | 3 | 20-01-2002 15:16 |
Hybrid Mode
