Chassis issue

[nixiebunny]

The AM14U instructions show 32"x23", either long or wide.

Another possibility that's easy to make is square, 28" long by 27" wide. That gives a bit of room for mechanisms on the sides, but is still longish.

We have already built ours 32"x32", and will get it running for prototyping, then cut it to final size AFTER we design our robot!

[MrForbes]

Originally Posted by nixiebunny

Another possibility that's easy to make is square, 28" long by 27" wide. That gives a bit of room for mechanisms on the sides, but is still longish.

Mondo good idea. Thanks!