|
|
|
 "The hardest part about building the robot is figuring out what to build..." - Jeff Waegelin [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| "The hardest part about building the robot is figuring out what to build..." - Jeff Waegelin [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Pressure Transducers and Pneumatic Changes
This year R83 has been modified to allow pressure transducers on the high side of the robot. Does anyone have any recommendations for what to use? I know that in 2004 in the KoP FIRST included the 5CP3 but I have been unable to find a seller.
It also seems that FIRST has been removing many pneumatic restrictions this year. Along with the transducer, R77 has been modified to allow higher flow solenoids, R82 no longer requirers the Norgren regulator, and R86 you do not need a regulator always on the robot. |
|
#2
06-01-2014, 00:45
|
||||
|
||||
|
Re: Pressure Transducers and Pneumatic Changes
We used a SPT25 from automation direct on cyber young, works great but it's a little expensive.
|
|
#3
06-01-2014, 09:26
|
|||||
|
|||||
|
Re: Pressure Transducers and Pneumatic Changes
We last used anSSI Technologies Inc transducer, also a pretty penny at $87, but less than the SPT25.
Search Digikey.com for 734-1003-ND Last edited by Mark McLeod : 06-01-2014 at 09:30. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
