Gyro Rate Constant

[Joe Ross]

Originally Posted by ebmonon36

0.007 is what we use. It is documented in the sensor manual. They did not update the front cover on it so it still says 2012.
http://www.usfirst.org/sites/default...meter-Gyro.pdf

According the KP Checklist, the gyro is an ADXRS652BBGZ-RL, rather then an ADW22307 as was used in previous years (and what is described in that document).

A quick check of the datasheet makes it look like the sensitivity is configurable. It would be either 0.007 or 0.006.

Originally Posted by PhilBot

0.0072 mv/d/s

I think you mean V/d/s