Back for more..VEXpro 2014 Product Unveiling

[Aren_Hill]

Originally Posted by martin417

Is it possible to get the 2 stage ball shifter with a 4" long output shaft? The CAD model of the "long output shaft" 2-stage shows a 1.59" long shaft.

Martin,

The "long output shaft" is intended for sprocket/pulley drives to a final ratio, as such the max length is 1.59".

If you want to extend this shaft you may look at using one of the colson live hubs as a hex extension to another piece of axle (rather deep hex bore).

Or if you're up to it you can press out the axle and insert your own (heat will be required), this may be difficult but is doable. If you take that route please pay attention to internal features you must replicate.