Go to Post but it was late and we were out of cardboard... - Nuttyman54 [more]
Home
Go Back   Chief Delphi > Technical > Pneumatics
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #21   Spotlight this post!  
Unread 10-01-2014, 12:50
hrench's Avatar
hrench hrench is offline
Mechanical build mentor
AKA: Bob Hrenchir
FRC #1108 (Panther Robotics)
Team Role: Mentor
 
Join Date: Jan 2012
Rookie Year: 2010
Location: Paola, KS
Posts: 220
hrench is a name known to allhrench is a name known to allhrench is a name known to allhrench is a name known to allhrench is a name known to allhrench is a name known to all
Re: Pneumatic speed

Quote:
Originally Posted by Jibri Wright View Post
Actually the piston is receiving 60psi the instant the solenoid switches. The reason it shoots slower in normal function is because the air on the other side of the cylinder has to be pushed out by the new air coming in. It takes time to do this and force. If you stall the piston's extension in the manner you're talking about then this allows for the air on the other side of the cylinder to be released. Pressure does build up on the other side, but all the air technically doesn't go into the piston. After the shaft is released does the remaining air enter the cylinder.
no, the cylinder receives only 'flow' from a 60 psi reservior. the pressure in the cylinder will only be what is required to move the piston forward until the piston becomes either obstructed or fully extended. This pressure may be as low as one psi delta.

What I'm saying is that if you just hold the piston in place for a short bit, the pressure will be able to build up. The business about the air getting out of the back side of the cylinder is so not-important. If you build-up 60 psi on one side and have effectively zero on the other side, it will move very fast. Our prototype can shoot across the room. But accuracy and repeatibility are still in question.
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 22:19.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi