cRIO won't reboot during imaging

stop whining about something that can be solved by working harder. - artdutra04 [more]

		Chief Delphi > Technical > Control System > FRC Control System
cRIO won't reboot during imaging

Thread Tools

Rate Thread

Display Modes

12-01-2014, 12:06

DavisC

Registered User

FRC #0539 (Titans)

Team Role: College Student

Join Date: Jul 2011

Rookie Year: 2010

Location: Virginia

Posts: 200

Re: cRIO won't reboot during imaging

I recommend following the guide at this link every time you re-image the cRIO, every time that I have sat down and followed it exactly I have successfully re-imaged it.

http://www.chiefdelphi.com/forums/sh...44&postcount=9

If you are unsure about needing a crossover cable, have the cRIO and computer connected via a switch or a router (wired connection).

Hope this helps!

__________________
FRC Team 539
Student Member: 2010 Breakaway - 2014 Aerial Assist
Mentor: 2015 Recycle Rush - present

Last edited by DavisC : 12-01-2014 at 21:56. Reason: Fixed Link

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 05:46.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.