cRIO Connection Failure

[wolfspell12]

Disconnected from wi-fi, no different. The cRIO imaging tool is not detecting any modules, despite the fact that there are three installed(This is an older style which has room for 8 modules if that matters.)

C:\Users\gcgh>tracert 10.32.44.2
Tracing route to 10.32.44.2 over a maximum of 30 hops
   1   gcgh02 [10.32.44.6]   reports: Destination host unreachable.
Trace complete.
C:\Users\gcgh>

Edit: also pinged again with wi-fi disconnected. Command prompt said pinging 10.32.44.2 but got a reply fro 10.32.44.6. (The computers IP) Sent 4 packets but lost none.