|
|
|
 But now we know what's inside Shaun's backpack!
...Don Rotolo's plastic egg. - MishraArtificer [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| But now we know what's inside Shaun's backpack!
...Don Rotolo's plastic egg. - MishraArtificer [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Gyro Issues
Our gyro isn't working. It is plugged into the Analog Channel and once we run the robot and try to get the gyro angle it starts at about 0.01 and constantly increases. Moving the robot doesn't change the rate at all.
If we try to get the voltage from the Analog Channel the Gyro returns 1.96-1.97 volts which doesn't change if we rotate the robot. What can we do to fix this? 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode