CRio II will not communicate

[1024Programming]

Originally Posted by Zmarken

My team had a similar issue, in which we couldn't update a cRIO, and one of our programmers shut off the power.

What worked for my team was simple: just reset the cRIO using the reset button. After resetting the cRIO, we were able to connect to it and image it like normal using the imaging tool.

Hope that helps!

We reset (holding the reset button to put it in safe mode) the CRio several times and unfortunately it did not restore our ability to communicate.

One thing we did not try is removing power from the CRio and then holding the reset button as we power up the CRio. Any chance that is what you did to restore communication?

Thanks!!