|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Cannot Deploy to cRIO
I am unable to deploy code to my cRIO and I don't know why.
The following is what I have done: - I have my firewall disabled - I am on the same subnet as the cRIO and can successfully ping to 10.xx.yy.2 in less than 1 ms every time - I have my FIRST Downloader preferences to have the correct team number and OUT file - I have disabled every adapter besides my ethernet one connecting to the crio - I have built my project - I have my robot on - I have successfully re-imaged my cRIO and set it up with revision 52 - I rebooted the cRIO before trying to deploy - I rebooted my laptop to see if that was the problem; it wasn't The following is the nature of the problem: - I click on deploy and nothing happens. I don't get a bar, nor an error. Just nothing happens. - Same thing happens when I try to undeploy Important things to know: - I have Windows 8 (Don't know if it matters) - When I disconnect the CAT5 from my laptop and try to deploy code, an error does show up All and any help is appreciated. Thanks. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|