|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Thanks for the input. I was looking high and low in the pneumatics section and found nothing.
So as long as it is less than $400 and has 1/8" pipe thread, and 125psi rated its legal? |
|
#2
|
||||
|
||||
|
Re: Solenoid Legality
Technically, the solenoid valves don't have to be rated for 125 psi if you use a second safety relief valve set lower than the solenoid's rated pressure. But yes, those are the only requirements this year.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|