Adding things to Content Center

[inventor_phild]

Let me check with some developers on that. Also, there is an Autodesk website called Autodesk Labs which often previews new technology or functionality that eventually finds it way into the product.

[docdavies]

Thanks for the instruction......I got the Tslot in and can now use it in the Frame Generator....this will save a lot of time.....and I love the miter function.

[inventor_phild]

DocDavies,

With reference to the mesh enabler, here is what I have found.

There IS a 2014 version, that is the good news.

Currently it is only available to subscription customers. Here is the link.

http://apps.exchange.autodesk.com/IN...enab ler%3aen

I am trying to find out if 2015 will have it included, or if we can get the 2014 version.

[docdavies]

Phil,

Like most poor mentors, I don't have a subscription so my attempts to download the plug in failed.

If you find any more about it please let me know.

We've got a good system set up to 3D scan our parts with the Kinect we all got in the kit a few years ago. It would be great to be able to bring them in, edit them, and then print.

Thanks again,
Doc

[inventor_phild]

I have come close to getting access with a few contacts, but we all end up at the Subscription page.

I do have a couple of other "resources" to tap into. Still trying.....