Adding things to Content Center

[docdavies]

Thanks for the instruction......I got the Tslot in and can now use it in the Frame Generator....this will save a lot of time.....and I love the miter function.

[inventor_phild]

DocDavies,

With reference to the mesh enabler, here is what I have found.

There IS a 2014 version, that is the good news.

Currently it is only available to subscription customers. Here is the link.

http://apps.exchange.autodesk.com/IN...enab ler%3aen

I am trying to find out if 2015 will have it included, or if we can get the 2014 version.

[docdavies]

Phil,

Like most poor mentors, I don't have a subscription so my attempts to download the plug in failed.

If you find any more about it please let me know.

We've got a good system set up to 3D scan our parts with the Kinect we all got in the kit a few years ago. It would be great to be able to bring them in, edit them, and then print.

Thanks again,
Doc

[inventor_phild]

I have come close to getting access with a few contacts, but we all end up at the Subscription page.

I do have a couple of other "resources" to tap into. Still trying.....