Java Deploy Does Not End

[Joe Ross]

The deploy process doesn't end normally, but your code is still running. The task messages are normal as well. I don't see any problems with what you posted.

Is there another problem you're having?

[lomogoto]

I would expect, when I open the DS and eneable, it would print "Hello World" to the window but it remains blank. Am I just misunderstanding what my code should do? Also I am worried that I need to manually kill the deploy process.

[lomogoto]

Here is also what the DS outputs when connecting if that helps.

Warning <Code> 44002 occurred at Ping Results:  link-bad,  DS radio(.4)-bad,  robot radio(.1)-GOOD,  cRIO(.2)-GOOD,  FMS-bad Driver Station
<time>1/18/2014 10:38:22 AM<unique#>7
FRC:  Driver Station ping status has changed.
Warning <Code> 44003 occurred at Driver Station
<time>1/18/2014 10:38:10 AM<unique#>6
FRC:  No robot code is currently running.
WARNING <Code> 44007 occurred at FRC_NetworkCommunications <secondsSinceReboot> 309.893
FRC:  Time since robot boot.
Warning <Code> 44001 occurred at Modified Network Configuration: Set Element not found.
FRC:  Driver Station network configuration status.





Driver Station
<time>1/18/2014 10:38:07 AM<unique#>5
Warning <Code> 44002 occurred at Ping Results:  link-bad,  DS radio(.4)-bad,  robot radio(.1)-bad,  cRIO(.2)-bad,  FMS-bad Driver Station
<time>1/18/2014 10:38:06 AM<unique#>4
FRC:  Driver Station ping status has changed.
Warning <Code> 44004 occurred at Driver Station
<time>1/18/2014 10:38:04 AM<unique#>3
FRC:  The Driver Station has lost communication with the robot.
ERROR <Code> -44009 occurred at Driver Station
<time>1/18/2014 10:38:04 AM<unique#>2
FRC:  A joystick was disconnected while the robot was enabled.

Warning <Code> 44006 occurred at Driver Station
<time>1/18/2014 10:38:04 AM<unique#>1
FRC:  Custom I/O is not enabled or is not connected to the driver station.

[Joe Ross]

It should be printing to the user messages window on the operation tab, not the messages window on the diagnostics tab (which you posted). Just want to make sure you're looking in the right place.

[lomogoto]

Yes I understand that. That issue was because there was no updateLCD() call. So that issue is now solved. Now my only issue is the manually ending the deploy which is a hastle but not critical. Thank you.