Go to Post While there are reasons to keep a float charge on your batteries, it may be like giving your son a flu shot when he has the measles. - ATannahill [more]
Home
Go Back   Chief Delphi > Technical > Programming
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Closed Thread
Thread Tools Rate Thread Display Modes
  #1   Spotlight this post!  
Unread 18-01-2014, 19:36
christopherjc54 christopherjc54 is offline
Registered User
FRC #3345
Team Role: Programmer
 
Join Date: Feb 2013
Rookie Year: 2013
Location: San Antonio, Texas
Posts: 1
christopherjc54 is an unknown quantity at this point
Exclamation IP Error for cRIO II Imaging

I'm trying to image my teams cRIO II (4-slot version) for the first time and I keep getting this error everytime:

"Unable to assign an IP address for the CompactRIO device. Ensure the IP Reset switch on the CompactRIO device is turned off."

I've allowed all the NI programs public & private access on the "network" which is directly connected to the robot. The 2014 imaging tool finds the robot, starts working, and then gets that error. Please help me with fixing this and tell me if I'm doing anything wrong or can go somewhere to get a fix, any help would be greatly appreciated!
  #2   Spotlight this post!  
Unread 18-01-2014, 19:54
Mark McLeod's Avatar
Mark McLeod Mark McLeod is online now
Just Itinerant
AKA: Hey dad...Father...MARK
FRC #0358 (Robotic Eagles)
Team Role: Engineer
 
Join Date: Mar 2003
Rookie Year: 2002
Location: Hauppauge, Long Island, NY
Posts: 8,900
Mark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond repute
Re: IP Error for cRIO II Imaging

Try holding down the reset button on the cRIO for ~ 10 seconds.
I believe the status light will go solid when you've held the reset button long enough.
Then run the cRIO Imaging Tool.

You should get a message about being in Safe Mode.
When given the choice, choose to reimage.
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle

Last edited by Mark McLeod : 18-01-2014 at 20:16.
  #3   Spotlight this post!  
Unread 18-01-2014, 20:31
Joey1939's Avatar
Joey1939 Joey1939 is offline
Registered User
AKA: Joey Holliday
FRC #1939 (Kuhnigits)
Team Role: Programmer
 
Join Date: Jan 2014
Rookie Year: 2014
Location: Kansas City, Missouri
Posts: 143
Joey1939 has a spectacular aura aboutJoey1939 has a spectacular aura aboutJoey1939 has a spectacular aura about
Re: IP Error for cRIO II Imaging

My team has spent several hours over the last week trying to image the cRIO. We found that the most reliable way is to reset the cRIO with the method above, and then image it from driver station. For some reason only the driver station would work without fail.
  #4   Spotlight this post!  
Unread 19-01-2014, 10:28
SuperBK's Avatar
SuperBK SuperBK is offline
Registered User
AKA: BrianK
FRC #1225 (Amperage Robotics)
Team Role: Mentor
 
Join Date: Jan 2007
Rookie Year: 2006
Location: Henersonville, NC
Posts: 358
SuperBK is just really niceSuperBK is just really niceSuperBK is just really niceSuperBK is just really nice
Re: IP Error for cRIO II Imaging

There are several threads on imaging tips.
1. Disable all other network adapters except the wired adapter doing the imaging (wireless, etc)
2. turn off windows firewall
3. Use a swap cable directly from the pc to the crio or go through the router on the robot with only the two things plugged in
4. Always image with a cable, not over wireless
5. Double check the ip address typed in is correct.
6. Ensure correct image is shown.
__________________
Brian K
Team 1225 Robotics Mentor
Closed Thread


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 11:27.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi