|
|
|
 I see all these people complaining about the FIRST game having perverse penalties for playing defense...then we play without defense, and still people complain. - MrForbes [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools |
Rating: 
|
Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: 5102's 3D Printed Shooter Prototype
Here's the part on printer. Printed in .2mm layer height, 2 shell thickness, and 10% infill. This one actually broke after 5 shots, when we tried using more surgical tubing.
The one in the video was printed at .2mm layer height, 5 shell thickness, and 20% infill. So far that one has held up well. |
|
#2
20-01-2014, 10:10
|
||||
|
||||
|
Re: 5102's 3D Printed Shooter Prototype
Just want to make sure we are all on the same page. The one in the video is 1 in diameter Delryn. We changed the prototype and the 3D printed piece would not fit. But it did however work. Just want to update you.
Brian. |
|
#3
20-01-2014, 22:27
|
|||||
|
|||||
Re: 5102's 3D Printed Shooter Prototype
awesome! appreciate the info, think we might print some dog gears. a higher impact application.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
