|
|
|
![]() |
|
|||||||
|
||||||||
| View Poll Results: What's your drive base? | |||
| 6/8 Wheel Tank |
|
169 | 71.31% |
| Mecanum |
|
33 | 13.92% |
| Swerve |
|
7 | 2.95% |
| Omni Drive |
|
6 | 2.53% |
| Octocanum |
|
8 | 3.38% |
| Other? |
|
14 | 5.91% |
| Voters: 237. You may not vote on this poll | |||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#16
|
||||
|
||||
|
Re: How are you Driving?
If I can make the quick argument here. West coast drive is extremely light, provides a very large wheel base, keeps the chains or belts protected and properly tensioned. In addition all of the parts to make one are now available OTS and it's been iterated to near perfection by teams like 254 and 973 if you want to find look for examples on how to do implement it most effectively.
|
|
#17
|
||||
|
||||
|
Re: How are you Driving?
We are driving wide with a 6 wheel WCD. We are using the vex 3.25" wheels and two 3 CIM Ball shifters geared for about 6fps and 16fps.
|
|
#18
|
||||
|
||||
|
Re: How are you Driving?
Quote:
|
|
#19
|
||||
|
||||
|
Re: How are you Driving?
That is why I noted it is very early, we redid the pistons (longer stoke and larger bore) before last season so now it is tight in both position, however we found last season that 25 chain would stretch to much so we switched to 35 chain. We have not had an issue with it since.
|
|
#20
|
|||||
|
|||||
|
Re: How are you Driving?
We're using 8 4" VexPro traction wheels. We're also making a plate-aluminum chassis for the first time in my team's history, as well as switching from our custom Thunder Drive transmissions to West Coast Product's 2 CIM Dog Shifter.
Last edited by jwallace15 : 20-01-2014 at 12:44. |
|
#21
|
|||||
|
|||||
|
Re: How are you Driving?
I'm excited we're using octocanum again. The new VexPro wheels make packaging everything within the smaller frame perimeter a lot easier.
http://imgur.com/Xel5dWw |
|
#22
|
||||
|
||||
|
Re: How are you Driving?
Quote:
|
|
#23
|
||||
|
||||
|
Re: How are you Driving?
We're doing the KOP frame with a 28" square base and Sonic Shifters with 4 CIMs.
We've never done shifters before and the new KOP chassis makes upgrading easy. Should be interesting... Haha. |
|
#24
|
||||
|
||||
|
Re: How are you Driving?
Technically you're a LONG way from any coast
![]() |
|
#25
|
|||
|
|||
|
Re: How are you Driving?
What is the reasoning behind trying to make your drive-train as light as possible? Is it simply to save weight-space for manipulators?
|
|
#26
|
||||
|
||||
|
Re: How are you Driving?
|
|
#27
|
|||
|
|||
|
Re: How are you Driving?
In support of this FRC558 is running an 8WD with 4"x2" Colsons and #35 Chain.
|
|
#28
|
|||
|
|||
|
Re: How are you Driving?
3467 will be running 6wd 4in x 1-1/2in Colson wheels and 3 CIM Ball Shifters.
Its time we catch on to the East Coast Conspiracy of Colsons. |
|
#29
|
|||||
|
|||||
|
Re: How are you Driving?
Adding weight is a lot easier and less stressful than removing weight.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|