Findings from a couple hours at the lab bench with a CIM and a Jaguar

Remember: "It's not the strongest that survive, but the most adaptable to change" - Daniel_LaFleur [more]

		Chief Delphi > Technical > Electrical > CAN
Findings from a couple hours at the lab bench with a CIM and a Jaguar

Thread Tools

Rate Thread

Display Modes

20-01-2014, 16:12

Ether

systems engineer (retired)

no team

Join Date: Nov 2009

Rookie Year: 1969

Location: US

Posts: 8,083

Re: Findings from a couple hours at the lab bench with a CIM and a Jaguar

Quote:

Originally Posted by zbrozek

Command is a 0-50%*Vin step response.

Would you please clarify what you mean by "Command is a response"?

Did you mean you are plotting the response that results from stepping the Jag from 0% to 50% PWM output duty cycle?

... and thank you for running these tests and posting the scope traces.

Last edited by Ether : 20-01-2014 at 16:18.

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 23:59.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.