|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
|
|||
|
|||
|
Re: [FTC]: Servo to button programming teleop
I'm not entirely sure if this is the issue but you might want to try putting an "==1" after you assign a button number.
Each button assignment should look something like this: if((joy1Btn(1) ==1)); { //servo code here } Hope this helps. JIT |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|