VEXPro Out of Stock

[Paul Copioli]

Originally Posted by rsegrest

Would this shipment happen to have any Versa Hex hubs 1/2" in it? I need those and would prefer to get them from you...

OK, so let's talk about Vershubs with 1/2" hex. We are all out of the normal Versahubs with 1/2" Hex including open orders to customers.

We have just sent 1,500 of the Versahubs with 1/4" bore to a machining house to be bored and broached, but here is the bad news: the only way to get fast turnaround on these part we need to rotary broach. What that means is the hex hole will not be oriented to the Versakey pattern. In my opinion, this does not matter because you only need one Versahub per shaft (see our diagrams on the product page). However, that is the best we have at the moment.

We are contacting customers with current orders to notify them that their hex hubs will not be oriented to the Versakey pattern. We know this situation sucks, but I feel it is better than just staying unavailable.