New Programming Core needs help with simple motor control - Page 2

There is almost always more than one solution to any engineering problem. One part of elegant design is picking the one that makes the most sense for a particular design problem, even if that means "breaking" some normally established "rules". - Jeff Pahl [more]

		Chief Delphi > Technical > Programming > NI LabVIEW
New Programming Core needs help with simple motor control

Thread Tools

Rate Thread

Display Modes

21-01-2014, 21:52

Cecil

Registered User

AKA: Alex Hummel

FRC #2010 (Lightning Bots)

Team Role: Mentor

Join Date: Dec 2008

Rookie Year: 2006

Location: Champion

Posts: 343

Re: New Programming Core needs help with simple motor control

Quote:

Originally Posted by Dexterium

What gauge is the wire to the sidecar from the distribution board? I looks like 18 from the picture and it needs to be at least 14.

What rule says that it has to be 14 AWG wire to the Digital Sidecar?

Try checking the Sidecar for metal swarf that could be shorting a few pins. If all else fails, try replacing it with a known working one and see if that helps. When everything is connected properly, all 3 lights should be glowing bright.

__________________
I'm right 90% of the time, so why worry about the other 3%?

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 20:53.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.